Free Shipping

Since 1999

0

First steps with the More button

Connect the button to Wi-Fi using WPS

  1. Press the button for 10 seconds → Flashes white/red
  2. Release and then press again within five seconds → Flashes white x 10
  3. Press the WPS button on your router within two minutes
  4. Button flashes green x 3 → Wi-Fi connection successful

You can check the connection by simply pressing the button – if it is connected then it will flash green. Go to your online account and choose which product you want your button to re-order, then place your first order with a double-click.

LED colors

  • OFF → More button inactive / no power
  • White / flashes every 15 seconds → Wi-Fi connection mode (WPS) for two minutes after resetting
  • Flashes white/red → Manual Wi-Fi connection mode
  • Flashes white x 10 → Reset successful
  • Button flashes green x 3 → Wi-Fi connection successful
  • Button flashes red x 3 → Wi-Fi connection unsuccessful

Charging the integrated battery

The More button has an integrated battery. It can be charged using a USB port/charger. To charge, remove the rubber ring, plug the USB charging cable into the More button and connect to your chosen USB port/charger.

No WPS?

Connect the button to Wi-Fi using the myStrom app

  1.  Download the app
  2. Launch the app
  3. Add Wi-Fi button and select the Light Version (the app only allows the button to be connected via Wi-Fi. The app’s other configuration options cannot be used with the More button.)

What do I do if my More button is not working?

Test your More button by placing it in the same area as your DSL router or access point. If the More button then functions correctly, the cause of the problem is mostly likely the signal being too weak at the installation site. If this is the case, installing a Wi-Fi repeater can help to increase the range of the Wi-Fi signal. If the More button still does not work after performing this test, then please perform a reset and reconnect it to the Wi-Fi.

Reset

Press the button for 10 seconds Flashes white/red Release and then press again within five seconds Flashes white x 10 – Returns the ‘More’ button to its factory settings. The Wi-Fi connection is lost.

1
2
3
4
5